Faucet Replacement in Dripping Springs and the Hill Country
A different kind of bro.
The part that decides a clean faucet swap is under the sink, not above it. Kitchen sink faucets, bathroom vanity faucets, utility sink faucets. Supply line work, connection testing, and clean removal of the old fixture, all completed in a single visit.
Under the Sink Is Where It Counts
Service overview
Faucet replacement is one of the most common small plumbing requests across Hill Country homes. A leaky or outdated faucet can be swapped for a new fixture in under an hour in most cases, immediately updating a kitchen or bathroom and stopping any drip waste. The Handy Bro handles every install personally with attention to supply line condition, valve operation, and final leak testing.
The scope is intentionally focused on faucet replacement, not broader plumbing work. The job covers everything from the supply lines to the fixture: shutoff valves, supply hoses, mounting hardware, drain stoppers where applicable, and connection testing. Work that goes past the supply lines (rough in plumbing, valve replacement, drain line work) is referred to Flint Plumbing LLC, a vetted trade partner.
Older faucet installs sometimes surface issues that homeowners did not know about: corroded supply lines that need replacement, shutoff valves that fail when turned, or sink mounting that has loosened over time. The Handy Bro scopes these during the property walk and addresses them as part of the install when they can be handled in the standard service window.
What the Swap Covers
Service scope
Faucet Replacement Covers
- Kitchen faucet swap including pull down and pull out sprayer models
- Bathroom vanity faucet replacement on single hole and widespread configurations
- Utility sink and laundry room faucet swap
- Supply line replacement during faucet swap when needed
- Pop up drain stopper installation and adjustment
- Final leak testing and aerator flush after install
What Is Not Included
Anything past the supply lines is referred to Flint Plumbing LLC, our vetted plumbing partner. That includes rough in plumbing changes, shutoff valve replacement when the old valves fail, drain line repair, and significant water damage repair behind the sink.
Fixtures That Are Ready to Go
Real scenarios
Pull Down and Pull Out Models
Kitchen faucet replacements with pull down or pull out sprayer mechanisms are the most common request. Installation includes the spray head weight, hose routing, and final flow testing.
Single Hole and Widespread Configurations
Bathroom vanity faucet swaps come in single hole (popular in modern vanities) and widespread three hole configurations. Each has its own mounting approach and hardware.
Replacing Corroded Supply Hoses
Older faucet installs sometimes have corroded or brittle supply hoses that need replacement during the swap. The Handy Bro handles supply hose replacement as part of the scope when needed.
Shutoff Valve Replacement (Refer Out)
When the existing shutoff valve fails (will not turn or leaks when opened), the work crosses into licensed plumbing territory. The Handy Bro coordinates with Flint Plumbing LLC for valve replacement before completing the faucet swap.
Faucet Questions, Answered
FAQ
What Does Faucet Replacement Run?
Cost depends on the faucet type, complexity, and whether supply lines or valves need replacement. A standard kitchen or bathroom swap is the lower end. The free property walk confirms scope.
How Long Does a Faucet Replacement Take?
A standard kitchen faucet swap typically takes 45 to 75 minutes. A widespread bathroom faucet runs 60 to 90 minutes. Supply line replacement or valve issues add time.
Do I Need to Provide the New Faucet?
Yes. The faucet should be purchased before the install. The Handy Bro can recommend specific products during the property walk based on your sink configuration and use pattern.
What If My Shutoff Valves Do Not Work?
If the shutoff valves under the sink fail (will not turn or leak when opened), the work crosses into licensed plumbing territory. The Handy Bro coordinates with Flint Plumbing LLC for valve replacement before completing the faucet swap.
Do You Handle the Drain Too?
Pop up drain stopper installation and adjustment is included with bathroom faucet swaps. Significant drain line work (clog clearing, P trap replacement, drain rough in changes) is referred to Flint Plumbing LLC.
Is This Offered Outside Dripping Springs?
Across all 13 Hill Country service areas. Faucet swaps are particularly common in older homes in Dripping Springs and Driftwood and in homes with hard water buildup damage.
How Quickly Can You Schedule a Faucet Replacement?
Most property walks schedule within 3 to 5 business days. The install typically schedules within 1 to 2 weeks of the property walk.
How the job runs
Five steps, from the free walk through the final walkthrough. See the full process.
Faucet Work Across the Hill Country
Service areas
Booked out of Dripping Springs and worked on a weekly route through Kyle, Dripping Springs, Oak Hill, Manchaca, and the rest of the 13 area service map.
Pricing
Pricing follows the walk, once scope and access are known. See the care packages.
A Job From the Route
Real work, real homes
Ready to Replace the Faucet?
Free property walk first, then a written scope. Nothing starts before you have both. The Handy Bro personally handles every faucet replacement project across Dripping Springs and the Hill Country.
Or call 254.371.3365
Thanks, Your Request Is In
Warren will reach out to set a time for your free property walk. Need him sooner? Call or text 254.371.3365.
One More Step
Your email app should open with your details filled in. Press send and it goes straight to Warren. If nothing opened, call or text 254.371.3365.
